Darrian
TM
Group A – 2WD Sierra Based front strut conversion for Darrian T9/90
The Kit utilises the Aluminium Group A 2WD
front strut/hub assembly and is designed as a bolt on conversion for Darrian
T9/90 cars to upgrade the front suspension.
The original Imp derived steering rack,
mounting plate and front pivots are retained.
If 15” wheels are used (7x15 ET 35) no
modification to the front inner arches are required.
For larger wheels the car should be
returned to Darrian workshops for chassis modification.
Later chassis, without inner arches, will
accept 17” wheels with GTR type front bodywork.
Drilling Jigs are provided for accurate
assembly.
Kit
Contents
£
1 Pr Group A Sierra strut/hub assemblies
inc. bearings/fittings 1,512.00
(Customers can use there own Group A
assemblies)
1 off Lower attachment plate/steering arm
set
100.00
1 Pr Lower wishbones - CDS tube type
300.00
4 off Inner rose joints and locknuts
120.00
2 off Outer rose joints and locknuts
80.00
1 Pivot lowering, side spacer and bolt kit
(exchange rack plate)
130.00
1 Pr. Rose jointed track rods
120.00
1 Pr. 3pc front turret kits to suit.
300.00
1 Pr Proflex EvoII 45mm triple adj. remote
res. inverted strut assemblies
Including main/tender springs and roller top mounts
2,200.00
1 Pr. Strut top blisters
50.00
Total
front £4,912.00
(Less Grp.A uprights £3,400.00)
Also
recommended
I Pr. Triple adj. Proflex rear dampers
840.00
1 set KW main and tender springs
130.00
1 Damper top mount kit
50.00
Total
rear £1,020.00
For further information
contact Tim Duffee
E-mail: teamduffee@aol.com
Phone: 01570493247
All prices are shown less VAT